Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › OIL PRESSURE SWITCHING VALVE
RM33A0E _51 Engine / Hybrid System _065347 A25A-FKS LUBRICATION _0328787 OIL PRESSURE SWITCHING VALVE A

A25A-FKS LUBRICATION  OIL PRESSURE SWITCHING VALVE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15250 1.INSTALL OIL PRESSURE CONTROL VALVE ASSEMBLY

a.
A402134C01
0.75,0.563 0.938,0.563 0.938,0.563 1.333,0.958 false 0.604,0.458 0.917,0.615 0.313,0.156 10 false *a
*a O-Ring


Apply a small amount of engine oil to the O-ring of the oil pressure control valve assembly.


b.

Using an 8 mm socket wrench, install the oil pressure control valve assembly to the timing chain cover assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

When reusing the oil pressure control valve assembly, inspect the O-ring.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




c.

Connect the oil pressure control valve assembly connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK

Hide 53736 3.INSTALL FRONT FENDER APRON SEAL RH