Home › Engine / Hybrid System › 2AR-FE (STARTING) › RELAY › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065330 2AR-FE STARTING _0328811 RELAY G

2AR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT ST RELAY

a.
E209082

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the ST NO. 1 relay.