FAIL-SAFE FUNCTION
When a malfunction occurs in the pre-collision system, a message will be displayed on the multi-information display and the pre-collision system will be disabled depending on the malfunction.
| Warning Message | Cause | DTC No. | Conditions to Return to Normal |
|---|---|---|---|
|
*1: w/ Camera Heater |
|||
| "Pre-Collision System Malfunction Visit Your Dealer" | Pre-collision system malfunction | C1A02 | System returns to normal |
| C1A10 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1A11 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1A14 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1A46 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1A47 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1A4B | System returns to normal | ||
| C1A50 | System returns to normal | ||
| C1A63 | System returns to normal | ||
| C1A69 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1AA0 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1AA8 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1AA9 | After system returns to normal, engine switch is turned off and then on (IG) | ||
| C1AAE*1 | System returns to normal | ||
| U0100 | System returns to normal | ||
| U0125 | System returns to normal | ||
| U0126 | System returns to normal | ||
| U0129 | System returns to normal | ||
| U0155 | System returns to normal | ||
| U0235 | System returns to normal | ||
| U023A | System returns to normal | ||
| U1002 | System returns to normal | ||
| "Pre-Collision System Unavailable" | ·
Millimeter wave radar sensor assembly misaligned ·
Millimeter wave radar sensor assembly temperature malfunction ·
Millimeter wave radar sensor assembly low voltage malfunction |
·
Millimeter wave radar sensor assembly beam axis adjustment is completed or beam axis learning is completed ·
Millimeter wave radar sensor assembly temperature returns to normal ·
Millimeter wave radar sensor assembly voltage returns to normal |
|
| "Pre-Collision System Unavailable Clean Sensor" | Foreign matter attached to millimeter wave radar sensor assembly | Millimeter wave radar sensor assembly is cleaned | |
| "Front Camera Unavailable" | Forward recognition camera temporarily malfunctioning
·
Abnormal forward recognition camera voltage ·
Forward recognition camera temperature outside of operational range |
·
Forward recognition camera temperature returns to normal ·
Forward recognition camera voltage returns to normal |
|
| "Front Camera Vision Blocked Clean and Demist Windshield" | Front of forward recognition camera or windshield glass is dirty or misty | Front of forward recognition camera or windshield glass is cleaned or demisted | |