Home › Engine / Hybrid System › 2AR-FE (LUBRICATION) › OIL PRESSURE SWITCH › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065329 2AR-FE LUBRICATION _0329382 OIL PRESSURE SWITCH G

2AR-FE LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
·
A345137

To prevent injury due to contact with an operating V-ribbed belt or cooling fan, keep your hands and clothing away from the V-ribbed belt and cooling fans when working in the engine compartment with the engine running or the ignition switch ON.

·
A344783

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.



PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch assembly connector.


b.

Start the engine.


c.
A159695

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Switch body Idling 10 kΩ or higher
Engine stopped Below 1 Ω


If the result is not as specified, replace the engine oil pressure switch assembly.


d.

Connect the engine oil pressure switch assembly connector.