Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for 2AR-FE) › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0327280 CRUISE CONTROL SYSTEM(for 2AR-FE) D

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for 2AR-FE)  ROAD TEST  


PROBLEM SYMPTOM CONFIRMATION


a.

Inspect the SET function.

i.
A401979

Turn the cruise control system on using the cruise control main switch.


ii.

Check that the cruise control indicator illuminates in the combination meter assembly.


iii.

Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).


iv.
A401980

Push the -SET switch.


v.
A229932C51
2.083,0.396 2.323,0.604 0.24,0.208 10 false *a 2.115,1.385 2.385,1.615 0.271,0.229 10 false *b
*a Cruise Control Indicator
*b Cruise SET Indicator


Check that the cruise SET indicator illuminates at this time.


vi.

After releasing the switch, check that the vehicle maintains the set speed.



b.

Inspect the + (ACCEL) function.

i.
A401979

Turn the cruise control system on using the cruise control main switch.


ii.

Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).


iii.
A401980

Push the -SET switch.


iv.
A401981

Check that vehicle speed increases while the +RES switch is pushed, and that the vehicle maintains the newly set speed when the switch is released.


v.

Push the +RES switch and then release it immediately. Check that vehicle speed increases by approximately 1 km/h or 1 mph (tap-up control).



c.

Inspect the - (COAST) function.

i.
A401979

Turn the cruise control system on using the cruise control main switch.


ii.

Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).


iii.
A401980

Push the -SET switch.


iv.

Check that vehicle speed decreases while the - SET switch is pushed, and the vehicle maintains the newly set speed when the switch is released.


v.

Push the -SET switch, and then release it immediately. Check that vehicle speed decreases by approximately 1 km/h or 1 mph (tap-down control).



d.

Inspect the CANCEL function.

i.
A401979

Turn the cruise control system on using the cruise control main switch.


ii.

Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).


iii.
A401980

Push the -SET switch.


iv.
A401982

When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.

·

Depressing the brake pedal.

·

Moving the shift lever from D or S to any other position.

·

Selecting the S3, S2 or S1 range with the shift lever in S.

·

Pushing the CANCEL switch.

·

Turning the cruise control system off using the cruise control main switch (the stored vehicle speed in the ECM is not maintained).




e.

Inspect the RES (RESUME) function.

i.
A401979

Turn the cruise control system on using the cruise control main switch.


ii.

Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).


iii.
A401980

Push the -SET switch.


iv.

Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the -SET switch).


v.
A401981

After pushing the +RES switch at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.