87810
1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)
| *a | Lock Lever |
|
Install in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to install it.
Confirm that the lock lever is securely engaged.
Engage the 2 claws to install the inner mirror base cover.
87810
2.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)
|
Install in this Direction |
Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
86466D
3.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
86466E
4.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)