Home › Engine / Hybrid System › A25A-FKS (FUEL) › FUEL PUMP (w/o Canister Pump Module) › from 2017.12
RM33A0E _51 Engine / Hybrid System _065343 A25A-FKS FUEL _0341521 FUEL PUMP(w/o Canister Pump Module) A

A25A-FKS FUEL  FUEL PUMP(w/o Canister Pump Module)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A502669C01
0.781,1.385 1.469,1.385 true 0.885,3.833 1.573,3.833 true 0.208,2.396 0.583,2.635 0.375,0.24 12 false *B 0.156,0.156 0.531,0.396 0.375,0.24 12 false *A 0.604,1.281 0.917,1.479 0.313,0.198 10 false *a 0.688,3.74 1,3.938 0.313,0.198 10 false *a
*A for Type A
*B for Type B
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 23221 2.REMOVE FUEL PUMP

a.

for Type A:

i.
A406599

Remove the harness protector from the fuel pump harness.


ii.
A406600

Disconnect the 2 fuel pump harness connectors.


iii.

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.

NOTICE:

Do not damage the wire harness.



iv.
A406593

Disengage the clamp to disconnect the tube from the fuel filter.


v.
A406594C01
0.604,1.417 0.813,1.417 0.813,1.417 1.052,0.833 true 0.417,1.313 0.729,1.469 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws.


vi.
A406595C01
2.125,1.969 1.833,1.969 1.833,1.969 1.406,1.271 true 2.177,1.896 2.49,2.052 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, separate the fuel filter from the fuel sub-tank.

NOTICE:
·

Do not damage the fuel sub-tank and fuel filter.

·

Pull out the fuel filter carefully because the O-ring is firmly installed between the fuel filter and fuel sub-tank.

·

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION




vii.
A401692

Remove the O-ring from the fuel sub-tank.


viii.
A401711

Disengage the claw to disconnect the fuel pump harness from the fuel pump.


ix.
A401712C01
0.927,0.99 1.198,0.99 false 0.917,1.823 1.188,1.823 false 1.354,2.094 1.469,2.094 1.469,2.094 1.635,1.708 true 0.76,0.896 1.073,1.052 0.313,0.156 10 false *a 0.75,1.74 1.063,1.896 0.313,0.156 10 false *b 1.188,2 1.5,2.156 0.313,0.156 10 false *c
*a Fuel Filter
*b Suction Filter
*c Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws, and remove the fuel pump from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or suction filter.

·

Do not remove the suction filter from the fuel pump.




x.
A401713

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump.


xi.
A401714C01
2.521,0.667 2.667,0.469 2.667,0.469 2.781,0.469 false 2.531,0.813 2.781,0.813 false 0.656,4.104 0.958,4.104 false 2.833,0.396 3.146,0.552 0.313,0.156 10 false *1 2.833,0.74 3.146,0.896 0.313,0.156 10 false *2 2.156,1.927 2.469,2.083 0.313,0.156 10 false *a 2.24,2.5 2.552,2.656 0.313,0.156 10 false *a 1,4.042 1.313,4.198 0.313,0.156 10 false *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.




b.

for Type B:

i.
A502670

Remove the harness protector from the fuel pump harness.


ii.
A406600

Disconnect the 2 fuel pump harness connectors.


iii.

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.

NOTICE:

Do not damage the wire harness.



iv.
A406544C01
2,1.604 2.198,1.938 2.198,1.938 2.365,1.938 true 0.375,1.156 1.385,1.156 true 2.438,1.854 2.75,2.01 0.313,0.156 10 false *a 0.198,1.083 0.51,1.24 0.313,0.156 10 false *b
*a Protective Tape
*b Fuel Pump Filter Hose


Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

NOTICE:

Do not damage the fuel sub-tank.



v.

Disengage the clamp and disconnect the fuel pump filter hose from the fuel sub-tank.

NOTICE:

Do not damage the fuel sub-tank.



vi.
A502671C01
0.406,1.385 0.74,1.385 false 0.229,1.292 0.542,1.531 0.313,0.24 10 false *a
*a Tube


Disengage the 2 claws and remove the fuel filter from the fuel sub-tank.

NOTICE:

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION



vii.
A502672

Disengage the claw to disconnect the fuel pump harness from the fuel pump.


viii.
A502673C01
0.938,0.99 1.354,0.99 true 2.583,1.771 2.854,1.771 false 1.063,2.042 1.177,2.042 1.177,2.042 1.25,1.792 true 0.76,0.896 1.042,1.146 0.281,0.25 10 false *a 2.896,1.688 3.156,1.927 0.26,0.24 10 false *b 0.885,1.938 1.229,2.115 0.344,0.177 10 false *c
*a Fuel Filter
*b Suction Filter
*c Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws, and remove the fuel pump from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or suction filter.

·

Do not remove the suction filter from the fuel pump.




ix.
A502674

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump.


x.
A502675C01
2.521,0.667 2.667,0.469 2.667,0.469 2.781,0.469 false 2.531,0.813 2.781,0.813 false 0.656,4.156 0.958,4.156 false 2.833,0.396 3.146,0.552 0.313,0.156 10 false *1 2.833,0.74 3.146,0.896 0.313,0.156 10 false *2 2.188,2 2.469,2.229 0.281,0.229 10 false *a 2.24,2.51 2.552,2.719 0.313,0.208 10 false *a 0.99,4.073 1.281,4.281 0.292,0.208 10 false *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.