Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › 2017.12–2021.02
RM33A0E _58 Vehicle Interior _065389 INTERIOR PANELS / TRIM _0325688 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 63342A 1.REMOVE NO. 2 ROOF SILENCER (for Normal Roof)

a.

Remove the No. 2 roof silencer.

B480153


Hide 63344A 2.REMOVE NO. 4 ROOF SILENCER (for Normal Roof)

a.

Remove the No. 4 roof silencer.

B480154


Hide 81340 3.REMOVE VANITY LIGHT ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.


a.
B468900C01
1.896,1.427 1.667,0.99 true 0.958,1.813 0.958,1.594 true 1.729,0.625 2.115,0.49 2.115,0.49 1.938,0.865 true 1.813,1.448 2.042,1.625 0.229,0.177 10 true *1 2.135,0.375 2.354,0.573 0.219,0.198 10 true *a 0.885,1.833 1.115,2.021 0.229,0.188 10 true *b
*1 Bulb Holder
*a Claw (A)
*b Claw (B)


Disengage the 2 claws (A) and separate the bulb holder from the vanity light assembly as shown in the illustration.


b.

Disengage the claw (B) to remove the vanity light assembly.


Hide 86101J 4.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 82171 5.REMOVE NO. 1 ROOF WIRE (for Normal Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B502817C01
0.083,0.167 0.5,0.5 0.417,0.333 12 false *A 0.083,3.167 0.5,3.5 0.417,0.333 12 false *B
*A w/ Room Light Assembly *B w/ Spot Light Assembly
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B481818C01
2.656,4.26 3.375,3.917 true 2.656,1.583 3.438,1.094 3.438,1.094 2.688,1.719 true 0.167,0.344 0.542,0.583 0.375,0.24 12 false *A 0.167,3.25 0.542,3.49 0.375,0.24 12 false *B 3.396,3.792 3.708,4.01 0.313,0.219 12 true *D 1.542,4.104 1.771,4.333 0.229,0.229 10 true *a 1.542,1.24 1.771,1.469 0.229,0.229 10 true *a 3.438,0.979 3.75,1.198 0.313,0.219 12 true *C
*A w/ Room Light Assembly *B w/ Spot Light Assembly
*C w/ EC Mirror or Pre-collision System *D for LHD with Rain Sensor
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 6.REMOVE NO. 1 ROOF WIRE (for Moon Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B502778C01
0,0 0,0 false
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B502777C01
1.573,1.635 1.771,1.833 0.198,0.198 10 true *a
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage the 5 clamps and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 7.REMOVE NO. 1 ROOF WIRE (for Panoramic Moon Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B484969C01
0,0 0,0 false
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B484970C01
2.927,1.927 3.448,1.625 true 3.469,1.479 3.844,1.719 0.375,0.24 12 false *A 1.802,1.771 2.01,1.969 0.208,0.198 10 true *a
*A for LHD with Rain Sensor - -
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.