64350A
1.INSTALL REAR WINDOW SHADE ASSEMBLY
Install the rear window shade assembly, and temporarily tighten the 3 bolts (A) and bolt (B).
Fully tighten the 4 bolts.
Connect the connector.
64340B
2.INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY
|
Install in this Direction |
Engage the 5 guides as shown in the illustration.
|
Install in this Direction |
Engage the 3 clips to install the No. 2 package tray trim panel assembly as shown in the illustration.
64165B
3.INSTALL NO. 1 UPPER BACK PANEL HOLE COVER
Install the No. 1 upper back panel hole cover.
64271G
4.INSTALL ROOM PARTITION BOARD RH (for Fold Down Seat Type)
64272B
5.INSTALL ROOM PARTITION BOARD LH (for Fold Down Seat Type)
64330
6.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
73373F
7.INSTALL REAR SEAT SHOULDER BELT HOLE COVER
62472A
8.INSTALL INNER ROOF SIDE GARNISH LH
62471A
9.INSTALL INNER ROOF SIDE GARNISH RH
Use the same procedure as for the LH side.
73370E
10.CONNECT REAR SEAT OUTER BELT ASSEMBLY LH
73360D
11.CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
81006
12.INSTALL CENTER STOP LIGHT SET
13.INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)
14.INSTALL REAR SEAT ASSEMBLY (for Reclining Seat Type)