Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › ENGINE OIL COOLER › 2017.12–2021.02
RM33A0E _51 Engine / Hybrid System _065347 A25A-FKS LUBRICATION _0341583 ENGINE OIL COOLER A

A25A-FKS LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 5.DRAIN ENGINE COOLANT

Hide 15710 7.REMOVE OIL COOLER ASSEMBLY

a.
A407320C01
0.646,0.792 1.073,0.792 true 2.271,1.844 2.271,1.542 true 0.438,0.698 0.646,0.896 0.208,0.198 10 true *1 2.188,1.854 2.385,2.042 0.198,0.188 10 true *2
*1 No. 1 Water By-pass Hose
*2 No. 2 Water By-pass Hose


Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the oil cooler assembly.


b.
A407321

Remove the 4 bolts and oil cooler assembly from the cylinder block sub-assembly.


c.
A407322

Remove the 2 oil cooler gaskets from the oil cooler assembly.


d.
A407323

Remove the oil control valve filter from the cylinder block sub-assembly.