The combination meter assembly communicates with each ECU via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| U010087 | Lost Communication With ECM/PCM "A" Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with ECM Malfunction Time: 3.6 seconds or more |
·
ECM ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U012987 | Lost Communication with Brake System Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with skid control ECU (brake actuator assembly) Malfunction Time: 1.0 seconds or more |
·
Skid control ECU (Brake actuator assembly) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U013187 | Lost Communication with Power Steering Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with power steering ECU (rack and pinion power steering gear assembly) Malfunction Time: 3.6 seconds or more |
·
Power steering ECU (Rack and pinion power steering gear assembly) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U014287 | Lost Communication with Body Control Module "B" Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with main body ECU (multiplex network body ECU) Malfunction Time: 5.0 seconds or more |
·
Main body ECU (Multiplex network body ECU) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U015187 | Lost Communication with Restraints Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with Airbag sensor assembly Malfunction Time: 5.0 seconds or more |
·
Airbag sensor assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U016387 | Lost Communication with Navigation Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with radio and display receiver assembly Malfunction Time: 5.0 seconds or more |
·
Radio and display receiver assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ No. 1 Stereo Jack Adapter Assembly |
| U016487 | Lost Communication with HVAC Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with air conditioning amplifier assembly Malfunction Time: 5.0 seconds or more |
·
Air conditioning amplifier assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U018287 | Lost Communication with Lighting Control Module Front Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with headlight ECU sub-assembly LH Malfunction Time: 5.0 seconds or more |
·
Headlight ECU sub-assembly LH ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Automatic Headlight Beam Level Control System |
| U023387 | Lost Communication with Side Obstacle Detection Control Module "B" Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with blind spot monitor sensor RH (B) Malfunction Time: 5.0 seconds or more |
·
Blind spot monitor sensor RH (B) ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Blind Spot Monitor System |
| U023587 | Lost Communication with Cruise Control Front Distance Range Sensor Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with millimeter wave radar sensor assembly Malfunction Time: 5.0 seconds or more |
·
Millimeter wave radar sensor assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Forward Recognition Camera |
| U023A87 | Lost Communication with Image Processing Module "A" Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with forward recognition camera Malfunction Time: 5.0 seconds or more |
·
Forward recognition camera ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Forward Recognition Camera |
| U032787 | Software Incompatibility with Vehicle Security Control Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with certification ECU (smart key ECU assembly) Malfunction Time: 5.0 seconds or more |
·
Certification ECU (Smart key ECU assembly) ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Smart Entry and Start System |
| U110687 | Lost Communication with Electric Parking Brake Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with skid control ECU (brake actuator assembly) Malfunction Time: 3.6 seconds or more |
·
Skid control ECU (Brake actuator assembly) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U111087 | Lost Communication with Intuitive Parking Assist Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with clearance warning ECU assembly Malfunction Time: 5.0 seconds or more |
·
Clearance warning ECU assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ TOYOTA Parking Assist-sensor System |
| U111287 | Lost Communication with Combination Switch Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with steering sensor Malfunction Time: 10.0 seconds or more |
·
Steering sensor ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U113387 | Lost Communication with PMN Module Missing Message | Diagnosis Condition:
·
The ignition switch is ON ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with certification ECU (smart key ECU assembly) Malfunction Time: 3.6 seconds or more |
·
Certification ECU (Smart key ECU assembly) ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Smart Entry and Start System |
Check for DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING