Home › General › MAINTENANCE › FRONT DISC BRAKE PAD(for 17 inch Front Disc Brake) › from 2017.12
RM33A0E _V1 General _065356 MAINTENANCE _0341738 FRONT DISC BRAKE PAD(for 17 inch Front Disc Brake) A

MAINTENANCE  FRONT DISC BRAKE PAD(for 17 inch Front Disc Brake)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Immediately after installing the front disc brake pads, the braking performance may be reduced. Always perform a road test in a safe place while paying attention to the surroundings.

·

After replacing the front disc brake pads, the brake pedal may feel soft due to clearance between the front disc brake pads and front disc. Depress the brake pedal several times until the brake pedal feels firm.

·

After replacing the front disc brake pads, always perform a road test to check the braking performance and check for vibrations.



HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.REMOVE FRONT DISC BRAKE PAD

CAUTION:
·

Be careful not to get pinched by the front disc brake cylinder assembly or other parts when removing the front disc brake pads.

·
C380042

After lifting up the front disc brake cylinder assembly, secure it in place before performing any work on it.

·

The front disc brake cylinder assembly could fall, pinching hands or fingers and causing injury.



a.
C380703C01
2.042,2.875 2.354,3.031 0.313,0.156 10 true *a 0.719,2.615 1.031,2.771 0.313,0.156 10 false *b
*a Turn
*b Hold


Hold the front disc brake cylinder slide pin (lower side) and remove the bolt.

NOTICE:

Do not kink or damage the brake line.



b.

Pull the front disc brake cylinder assembly upward.


c.
C380704

Remove the 2 anti-squeal springs.


d.

Remove the 2 front disc brake pads from the front disc brake cylinder mounting.


Hide 04945 3.REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

a.

Remove the front No. 1 disc brake anti-squeal shim and front No. 2 disc brake anti-squeal shim from each front disc brake pad.


b.
C391965

Using a screwdriver, remove the front disc brake pad wear indicator plate from each front disc brake pad.