Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Reclining Seat Type) › 2017.12–2018.04
RM33A0E _58 Vehicle Interior _065385 SEAT _0327859 REAR SEAT ASSEMBLY(for Reclining Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Reclining Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for LH Side)

a.
B488986

Disengage the 11 hooks.


b.
B488987C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the rear side seatback cover with pad from the rear side seatback frame sub-assembly LH as shown in the illustration.


Hide 71089A 2.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)

a.

Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.


Hide 3.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71088A 4.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73344 5.REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)

a.
B488991

Remove the 2 screws.


b.

Disengage the guide to remove the rear seat shoulder belt guide LH.


Hide 71931A 6.REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)

a.
B488992C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.


Hide 7.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B488996

Disengage the 13 hooks.


b.

Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly.


Hide 71078S 8.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

a.

Using a screwdriver, disengage the 8 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.

B488997C01
1.51,2.5 1.792,2.5 false 1.813,2.417 2.042,2.604 0.229,0.188 10 false *a
*a Screwdriver - -



Hide 87510P 9.REMOVE REAR SEATBACK HEATER ASSEMBLY LH (for LH Side)

Hide 73345 10.REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)

a.
B488990

Remove the 2 screws.


b.

Disengage the guide to remove the rear seat center shoulder belt guide.


Hide 73343 11.REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71931A 12.REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 13.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71078S 14.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 87510Q 15.REMOVE REAR SEATBACK HEATER ASSEMBLY RH (for RH Side)

w/ Seat Heater System:

HINT:

Use the same procedure as for the LH side.


Hide 16.REMOVE REAR CENTER SEATBACK FRAME WITH COVER AND PAD (for Center Seat)

a.
B489002

Remove the 2 nuts.


b.

Disengage the 2 claws to remove the rear center seatback frame with cover and pad.


Hide 72883A 17.REMOVE NO. 1 REAR SEAT CENTER ARMREST BRACKET (for Center Seat)

a.
B489003

Disengage the clamp.


b.

Remove the 2 bolts, 2 bushes and No. 1 rear seat center armrest bracket.


Hide 72830 18.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for Center Seat)

a.
B489004

Disengage the clamp.


b.
B489007

Disengage the 2 clips to remove the rear seat center armrest assembly from the rear seat center armrest box assembly.


Hide 88660C 19.REMOVE COOLER CONTROL SWITCH ASSEMBLY (for Center Seat)

a.
B489009

Disengage the 4 claws.


b.
B489010

Disconnect the 2 connectors to remove the cooler control switch assembly.


Hide 72806D 20.REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for Center Seat)

a.
B489011

Remove the 2 screws and rear seat center armrest cover with pad.


b.
B489012

Disengage the 16 claws to remove the 2 rear seat center armrest plates.


c.
B489013C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 screws and rear seat center armrest cup holder sub-assembly as shown in the illustration.


Hide 82176 21.REMOVE REAR CONSOLE BOX WIRE (for Center Seat)

a.
B489015

Remove the rear seat center armrest pad from the rear seat center armrest box.


b.
B489016

Disengage the 3 clamps and remove the rear console box wire.


Hide 71931A 22.REMOVE REAR SEAT HEADREST SUPPORT (for Center Seat)

a.
B489005C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.


Hide 71095S 23.REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

a.
B489008

Disengage the 7 hooks and remove the center seatback cover with pad from the center seatback frame sub-assembly.


b.

Remove the center seatback cover sub-assembly from the center seatback pad sub-assembly.


Hide 72740A 24.REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY LH

a.
B489000

Disconnect the connector.


b.

Remove the 2 bolts and 2 nuts, and rear seat reclining adjuster assembly LH.


Hide 72730A 25.REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 73731 26.REMOVE CHILD RESTRAINT SEAT COVER

a.
B470148C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all of the child restraint seat covers.



Hide 73733 27.REMOVE CHILD RESTRAINT SEAT BASE COVER

a.
B474271C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screw.


b.

Disengage the claw and guide to remove the child restraint seat base cover as shown in the illustration.

HINT:

Use the same procedure for all of the child restraint seat base covers.



Hide 71075B 28.REMOVE BENCH TYPE REAR SEAT CUSHION COVER

a.

Disengage the 4 fasteners.

B470152C09
0,0 0,0 false
V100155

Fastener - -



b.

Disengage the 6 hooks.

B470153


c.

Remove the 6 hog rings.

B479633


d.

Remove the 2 hog rings.

B479634


e.

Disengage the 20 hooks.

B470156


f.

Using a screwdriver, disengage the 24 claws and remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.

B470157C01
1.521,2.385 1.896,2.385 false 1.948,2.281 2.26,2.521 0.313,0.24 10 false *a
*a Screwdriver - -



Hide 87510T 29.REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)