Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (except 2AR-FE) › 2017.12–2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0326623 DYNAMIC RADAR CRUISE CONTROL SYSTEM(except 2AR-FE) D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(except 2AR-FE)  FREEZE FRAME DATA  


CHECK FREEZE FRAME DATA


HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Trouble Codes.

·

*1: Output from the ECM

·

*2: Output from the millimeter wave radar sensor assembly



e.

From the DTC screen, select the DTCs (with snow icon) for which freeze frame data is recorded.



LIST OF FREEZE FRAME DATA


a.

Radar Cruise 1:

Powertrain > Cruise Control
Tester Display
Cruise Vehicle Speed
Cruise Memory Vehicle Speed
Cruise Request Throttle Opening Angle
Cruise Target Acceleration
Driving Support ECU Target Acceleration
Cruise Request Driving Force
Cruise Request Driving Force Feedback Status
Cruise Control Permission Condition
Cruise Control Condition
Cruise Main Switch Operation Condition
Accelerator Pedal
Cruise Brake Cancel Switch
Stop Light Switch Main-CPU
Stop Light Switch Sub-CPU
Request Manual Cancel
Request Automatic Cancel
Cruise Brake Control Decision
Cruise Brake Control Permission Condition

b.

Radar Cruise 2:

Powertrain > Radar Cruise2
Tester Display
Cruise Control Mode
Vehicle Distance
Vehicle Acceleration
Closed Throttle Position
Forward Vhcl Relative Spd
Vehicle Approach Warning
Frnt Radar Sens Temp Hi
Front Radar Voltage