Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) › from 2017.12
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0341905 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) W

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  CUSTOMIZE PARAMETERS  


CUSTOMIZE AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)


a.

Customizing with the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


i.

Connect the GTS.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Air Conditioner.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Description Default Setting ECU
Ambient Temperature Shift Function to display the shifted ambient temperature versus the actual ambient temperature Normal 0000001:-3C,0000010:-2C,0000100:-1C,0001000:Normal,0010000:+1C,0100000:+2C,1000000:+3C Air conditioning amplifier assembly
Refrigerant Shortage Check Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON ON 0:ON,1:OFF Air conditioning amplifier assembly
Outside Air Mode Auto Switch Function Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds ON 0:ON,1:OFF Air conditioning amplifier assembly
50006 11