Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) › from 2017.12
RM33A0E _58 Vehicle Interior _065385 SEAT _0341937 LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) A

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71587 1.INSTALL FRONT SEATBACK EDGE PROTECTOR

Hide 72750D 2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY RH

a.

Install the seatback felt to the lumbar support adjuster assembly RH.


b.
B491289C01
0,0 0,0 false
V113147

Install in this Direction


Install the lumbar support adjuster assembly RH to the front seatback frame sub-assembly as shown in the illustration.


c.
B491287

Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.


d.
B491286

Engage the clamp.


e.

Connect the connector.


Hide 3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Hide 71931 4.INSTALL FRONT SEAT HEADREST SUPPORT

Hide 5.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Hide 71861 6.INSTALL FRONT SEAT INNER CUSHION SHIELD RH

Hide 71811D 7.INSTALL FRONT SEAT CUSHION SHIELD RH

Hide 71848A 8.INSTALL SEAT ADJUSTER COVER CAP RH

Hide 72525A 9.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

Hide 72551B 10.INSTALL RECLINING HINGE COVER RH

Hide 72494 11.INSTALL VERTICAL ADJUSTING HANDLE RH

Hide 71073S 12.CONNECT SEPARATE TYPE FRONT SEATBACK COVER