Home › Vehicle Interior › SEAT › REAR SEATBACK HEATER (for Reclining Seat Type) › from 2017.12
RM33A0E _58 Vehicle Interior _065385 SEAT _0341880 REAR SEATBACK HEATER G

SEAT  REAR SEATBACK HEATER  INSPECTION  


PROCEDURE

Hide 87510S 1.INSPECT REAR SEATBACK HEATER ASSEMBLY LH

a.
B493137C01
0.719,0.396 1.135,0.688 0.417,0.292 2.313,0.333 2.667,0.573 0.354,0.24 0.198,0.167 0.469,0.427 0.271,0.26 10 false *a 0.76,0.458 1.177,0.729 0.417,0.271 10 false R102 2.448,0.365 2.677,0.594 0.229,0.229 10 false C
*a Component without harness connected
(Rear Seatback Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
R102-3 - C-3 Always Below 1 Ω
R102-1 - C-4 Always Below 1 Ω
R102-4 - C-1 Seat heater temperature 20 °C (68 °F) 1.18 to 1.40 Ω
R102-4 - C-2 Seat heater temperature 20 °C (68 °F) 2.42 to 2.88 Ω
R102-2 - C-5 Always Below 1 Ω


If the result is not as specified, replace the rear seatback heater assembly LH.


Hide 87510T 2.INSPECT REAR SEATBACK HEATER ASSEMBLY RH

a.
B493139C01
0.24,0.208 0.563,0.542 0.323,0.333 10 false *a
*a Component without harness connected
(Rear Seatback Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seat heater temperature 20 °C (68 °F) 2.42 to 2.88 Ω
1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.39 Ω


If the result is not as specified, replace the rear seatback heater assembly RH.