Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM › from 2017.12
RM33A0E _58 Vehicle Interior _065385 SEAT _0328609 SEAT HEATER SYSTEM W

SEAT  SEAT HEATER SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE COOLER CONTROL SWITCH ASSEMBLY (Sensitivity Level)


E371747C02
1.719,1.958 1.719,0.958 false 0.531,1.927 0.531,0.99 false 2.844,1.938 2.844,0.99 false 2.542,1.938 2.542,0.99 false 1.646,1.958 1.958,2.156 0.313,0.198 10 false *a 0.458,1.948 0.771,2.146 0.313,0.198 10 false *b 2.469,1.938 2.781,2.135 0.313,0.198 10 false *c 0.063,0.115 0.375,0.313 0.313,0.198 10 false *1 2.792,1.938 3.104,2.135 0.313,0.198 10 false *d
*1 Cooler Control Switch Assembly
*a Home Switch
*b Left Seat Reclining Forward Switch
*c Right Seat Reclining Forward Switch
*d Right Seat Reclining Back Switch


a.

Turn the engine switch on (ACC).


b.

While pressing and holding the home switch, touch the left seat reclining forward switch and right seat reclining back switch for 20 seconds or more.

HINT:

Make sure not to touch any switch except the left seat reclining forward switch and right seat reclining back switch.



c.

When a beep emitted, release the home switch, left seat reclining forward switch and right seat reclining back switch.


d.

Touch the right seat reclining forward switch or right seat reclining back switch to adjust the sensitivity level.

Setting
Switch Sensitivity Level Adjustment
Right seat reclining forward switch Up
Right seat reclining back switch Down


e.

Check the selected sensitivity level according to the number of times the seat reclining switches blink.

Answer-back Function
Sensitivity Level Number of Blinks
High
(Default)
10
Medium 9
Low 8


f.

Perform any of the following to end customization.

·

Wait 10 seconds or more without touching a seat reclining switch.

·

Press the home switch.

·

Turn the ignition switch off.

·

Turn the ignition switch to ON.