Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › 2017.12–2021.02
RM33A0E _58 Vehicle Interior _065384 PRE-COLLISION _0319645 PRE-COLLISION SYSTEM D

PRE-COLLISION  PRE-COLLISION SYSTEM  OPERATION CHECK  


CHECK PRE-COLLISION SYSTEM SETTING


a.

Turn the ignition switch to ON.


b.

Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on.

HINT:

When the ignition switch is turned to ON, the pre-collision system will automatically turn on. This can be changed through a customize setting using the GTS.



c.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.



CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING


a.

Turn the ignition switch to ON.


b.

Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

The pre-collision system warning timing status remains unchanged when the ignition switch is turned off and back to ON. This can be changed through a customize setting using the GTS.

·

The default setting is "Mid".