Use the same procedure for the RHD side and LHD side.
The following procedure is for the LHD side.
84153
1.INSTALL AUTO HIGH BEAM SWITCH
for LHD:
|
Install in this Direction |
Engage the 2 claws to install the auto high beam switch as shown in the illustration.
for RHD:
|
Install in this Direction |
Engage the 2 claws to install the auto high beam switch as shown in the illustration.
55302D
2.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)
55302D
3.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)
53601
4.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55436B
5.INSTALL NO. 2 METER HOOD CLUSTER
55606
6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
55606
7.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
55318C
8.INSTALL INSTRUMENT SIDE PANEL LH
62312B
9.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62112A
10.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
67914
11.INSTALL FRONT DOOR SCUFF PLATE LH
55434B
12.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (w/o Driver Side Knee Airbag)
55435B
13.INSTALL NO. 1 METER HOOD CLUSTER (w/o Driver Side Knee Airbag)