Wear protective gloves. Sharp areas on the parts may injure your hands.
73344
1.REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
Remove the 2 screws.
Disengage the guide to remove the rear seat shoulder belt guide LH.
2.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for LH Side)
w/ Rear Seat Side Airbag:
Remove the 2 nuts.
Disengage the 15 hooks.
|
Remove in this Direction |
Remove the rear side seatback cover with pad from the rear side seatback frame sub-assembly LH as shown in the illustration.
73940A
3.REMOVE REAR SEAT AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag)
71089A
4.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.
73343
5.REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)
Use the same procedure as for the LH side.
6.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for RH Side)
Use the same procedure as for the LH side.
73930A
7.REMOVE REAR SEAT AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
Use the same procedure as for the LH side.
71088A
8.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
Use the same procedure as for the LH side.
72667
9.REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side)
Disengage the 4 claws to remove the rear seatback upper lock bezel.
10.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
w/ Seat Heater System:
Disengage the clamp.
Disengage the 4 hooks.
for Removable Headrest:
|
Remove in this Direction |
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH as shown in the illustration.
71078S
11.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
w/o Removable Headrest:
Using a screwdriver, disengage the 6 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
w/ Removable Headrest:
Using a screwdriver, disengage the 5 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
87510P
12.REMOVE REAR SEATBACK HEATER ASSEMBLY LH (for LH Side)
w/ Seat Heater System:
Click hereVehicle Interior>SEAT>REAR SEATBACK HEATER (for Fold Down Seat Type)>REMOVAL
71349C
13.REMOVE REAR SEATBACK HINGE COVER (for RH Side)
|
Remove in this Direction |
Disengage the 2 claws.
Disengage the pin and remove the rear seatback hinge cover as shown in the illustration.
72830
14.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
Remove the bolt and bush.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the pin and remove the rear seat center armrest assembly as shown in the illustration.
|
Remove in this Direction |
Remove the bush as shown in the illustration.
72860
15.REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY (for RH Side)
for Type A:
Disengage the 4 claws to remove the rear seat center armrest box assembly.
72987
16.REMOVE REAR SEAT CENTER ARMREST COVER (for RH Side)
for Type A:
Remove the rear seat center armrest cover.
72806D
17.REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side)
for Type A:
Remove the 2 screws and rear seat center armrest cup holder sub-assembly.
for Type B:
Using a moulding remover, disengage the 2 claws as shown in the illustration.
|
Remove in this Direction |
Disengage the 2 guides and remove the rear seat center armrest cup holder sub-assembly as shown in the illustration.
72087A
18.REMOVE REAR SEAT CENTER ARMREST COVER SUB-ASSEMBLY (for RH Side)
| *a | Fastener |
Open the fastener as shown in the illustration and remove the rear seat center armrest cover sub-assembly from the rear seat center armrest pad sub-assembly.
73345
19.REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
Remove the 2 screws.
Disengage the guide to remove the rear seat center shoulder belt guide.
72667
20.REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side)
Disengage the 4 claws to remove the rear seatback upper lock bezel.
21.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
w/ Seat Heater System:
Disengage the clamp.
Disengage the 6 hooks.
for Removable Headrest:
|
Remove in this Direction |
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH as shown in the illustration.
71077S
22.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
Disengage the 6 guides.
w/o Removable Headrest:
Using a screwdriver, disengage the 6 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
w/ Removable Headrest:
Using a screwdriver, disengage the 5 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
87510Q
23.REMOVE REAR SEATBACK HEATER ASSEMBLY RH (for RH Side)
w/ Seat Heater System:
Click hereVehicle Interior>SEAT>REAR SEATBACK HEATER (for Fold Down Seat Type)>REMOVAL
73731
24.REMOVE CHILD RESTRAINT SEAT COVER
|
Remove in this Direction |
Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.
Use the same procedure for all of the child restraint seat covers.
73733
25.REMOVE CHILD RESTRAINT SEAT BASE COVER
|
Remove in this Direction |
Remove the screw.
Disengage the claw and guide to remove the child restraint seat base cover as shown in the illustration.
Use the same procedure for all of the child restraint seat base covers.
71075B
26.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Disengage the 4 fasteners.
|
Fastener | - | - |
Disengage the 6 hooks.
Remove the 6 hog rings.
Remove the 2 hog rings.
Disengage the 20 hooks.
Using a screwdriver, disengage the 24 claws and remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
| *a | Screwdriver | - | - |
87510T
27.REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)