Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE › from 2018.04
RM33A0E _59 Vehicle Exterior _065394 WIPER / WASHER _0320462 WASHER NOZZLE G

WIPER / WASHER  WASHER NOZZLE  INSPECTION  


PROCEDURE

Hide 85035 1.INSPECT WASHER NOZZLE SUB-ASSEMBLY

a.
E335880C01
0.333,0.281 0.646,0.479 0.313,0.198 10 false *a
*a Component without harness connected
(Washer Nozzle Sub-assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 22 Ω


If the result is not as specified, replace the washer nozzle sub-assembly.