Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM › 2018.04–2021.08
RM33A0E _58 Vehicle Interior _065385 SEAT _0328607 CLIMATE CONTROL SEAT SYSTEM U

SEAT  CLIMATE CONTROL SEAT SYSTEM  TERMINALS OF ECU  


CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


E328992C37
4.365,1.969 4.729,2.208 0.365,0.24 5.594,1.969 5.958,2.208 0.365,0.24 3.906,0.125 4.271,0.365 0.365,0.24 2.542,0.125 2.906,0.365 0.365,0.24 2.99,1.969 3.354,2.208 0.365,0.24 1.594,1.948 1.958,2.188 0.365,0.24 5.104,0.135 5.469,0.375 0.365,0.24 3.063,2 3.521,2.198 0.458,0.198 10 false K55 4.438,2 4.896,2.198 0.458,0.198 10 false K54 5.656,1.99 6.115,2.188 0.458,0.198 10 false z11 2.615,0.167 3.073,0.365 0.458,0.198 10 false K55 4,0.177 4.458,0.375 0.458,0.198 10 false K54 0.104,0.094 0.563,0.292 0.458,0.198 12 false *A 0.094,1.979 0.552,2.177 0.458,0.198 12 false *B 1.635,2.01 2.094,2.208 0.458,0.198 10 false K56 5.177,0.177 5.49,0.375 0.313,0.198 10 false z11
*A w/o Seat Heater *B w/ Seat Heater


a.

Disconnect the K54 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K54-2 (IG+) - Body ground LA-GR - Body ground Air conditioning amplifier power supply Engine switch off Below 1 V
K54-2 (IG+) - Body ground LA-GR - Body ground Air conditioning amplifier power supply Engine switch on (IG) 11 to 14 V
K54-4 (GND) - Body ground W-B - Body ground Air conditioning amplifier ground Always Below 1 Ω


c.

Reconnect the K54 air conditioning amplifier assembly connector.


d.

Check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K54-24 (LOUT) - Body ground G - Body ground Climate control blower control signal
·

Engine switch on (IG)

·

Refreshing seat switch (for LH) on

(blower position)


Pulse generation
(See waveform)
K54-23 (ROUT) - Body ground LG - Body ground Climate control blower control signal
·

Engine switch on (IG)

·

Refreshing seat switch (for RH) on

(blower position)


Pulse generation
(See waveform)
K54-14 (SLIN) - Body ground BE - Body ground Refreshing seat switch signal Engine switch on (IG) Pulse generation

i.
B295627N02
0.156,1.594 0.594,1.833 0.438,0.24 10 false GND

Waveform (Reference):

Measurement Condition
Item Content
Tester Connection
·

K54-24 (LOUT) - Body ground

·

K54-23 (ROUT) - Body ground


Tool Setting 1 V/DIV., 0.5 ms/DIV.
Vehicle Condition
·

Engine switch on (IG)

·

Refreshing seat switch on

(blower position)






REFRESHING SEAT SWITCH


B454542N03
3.333,0.167 3.75,0.417 0.417,0.25 3.417,0.208 3.875,0.406 0.458,0.198 10 false K49

a.

Disconnect the K49 refreshing seat switch connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K49-1 (IG) - Body ground LG - Body ground Refreshing seat switch power supply Engine switch off Below 1 V
K49-1 (IG) - Body ground LG - Body ground Refreshing seat switch power supply Engine switch on (IG) 11 to 14 V
K49-5 (E) - Body ground W-B - Body ground Refreshing seat switch ground Always Below 1 Ω


c.

Reconnect the K49 refreshing seat switch connector.


d.

Check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K49-3 (SLIN) - Body ground B - Body ground Refreshing seat switch signal Engine switch on (IG) Pulse generation