Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 6AR-FSE) › 2018.04–2021.02
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0351029 VACUUM PUMP(for 6AR-FSE) G

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 6AR-FSE)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. OPERATION CHECK

a.

Slide the clip and disconnect the union to check valve hose from the vacuum pump assembly.


b.
C384645C01
0.438,0.844 0.792,0.844 true 1.76,0.208 2.073,0.208 false 2.094,0.125 2.406,0.281 0.313,0.156 10 false *a 0.281,0.771 0.594,0.927 0.313,0.156 10 false *b
*a Vacuum Gauge
*b Plug


Connect the hose of the vacuum gauge to the vacuum pump assembly.


c.

Start the engine and warm it up for more than 2 minutes.


d.

With the engine idling, check the vacuum of the vacuum pump assembly.

Standard Pressure:

More than 86.7 kPa (650 mmHg, 25.6 in.Hg)


HINT:

If the result is not as specified, replace the vacuum pump assembly.



e.

Remove the vacuum gauge from the vacuum pump assembly.


f.

Connect the union to check valve hose to the vacuum pump assembly and slide the clip to secure it.