Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (except 2AR-FE) › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0326622 CRUISE CONTROL SYSTEM(except 2AR-FE) U

CRUISE CONTROL  CRUISE CONTROL SYSTEM(except 2AR-FE)  TERMINALS OF ECM  


CHECK ECM (for 2GR-FKS)


A247842N91
2.458,0.354 2.854,0.594 0.396,0.24 5.906,0.354 6.302,0.594 0.396,0.24 2.542,0.396 2.948,0.625 0.406,0.229 10 false C96 5.979,0.396 6.385,0.656 0.406,0.26 10 false A23

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A23-1 (BATT) - C96-53 (E1) R - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
C96-139 (D) - C96-53 (E1) R - W-B D shift position signal Engine switch on (IG), shift lever in D 11 to 14 V
Engine switch on (IG), shift lever not in D Below 1 V
A23-17 (S) - C96-53 (E1) GR - W-B S shift position signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever not in S Below 1 V
A23-27 (STP) - C96-53 (E1) SB - W-B Stop light switch signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A23-41 (CCS) - C96-53 (E1) R - W-B Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
+RES switch pushed 235 to 245 Ω
-SET switch pushed 617 to 643 Ω
CANCEL switch pushed 1509 to 1571 Ω
A23-42 (ST1-) - C96-53 (E1) LG - W-B Stop light switch signal Engine switch on (IG), brake pedal depressed Below 1 V
Engine switch on (IG), brake pedal released 11 to 14 V
A23-37 (SFTD) - C96-53 (E1) W - W-B Down-shift position switch signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever in "-" Below 1 V
A23-38 (SFTU) - C96-53 (E1) G - W-B Up-shift position switch signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever in "+" Below 1 V


CHECK ECM (for A25A-FKS)


C370678N11
5.5,0.427 5.917,0.677 0.417,0.25 1.75,0.427 2.167,0.677 0.417,0.25 3.865,0.427 4.281,0.677 0.417,0.25 5.583,0.469 6.042,0.667 0.458,0.198 10 false A24 3.948,0.479 4.406,0.677 0.458,0.198 10 false C59 1.833,0.469 2.292,0.667 0.458,0.198 10 false C57

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A24-1 (BATT) - A24-10 (E1) G - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
C59-23 (D) - A24-10 (E1) R - W-B D shift position signal Ignition switch ON, shift lever in D 11 to 14 V
Ignition switch ON, shift lever not in D Below 1 V
A24-14 (S) - A24-10 (E1) GR - W-B S shift position signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever not in S Below 1 V
A24-21 (STP) - A24-10 (E1) SB - W-B Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A24-27 (CCS) - A24-28 (ECCS) R - BE Steering Pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
+RES switch pushed 235 to 245 Ω
-SET switch pushed 617 to 643 Ω
CANCEL switch pushed 1509 to 1571 Ω
A24-22 (ST1-) - A24-10 (E1) LG - W-B Stop light switch assembly signal Ignition switch ON, brake pedal depressed Below 1 V
Ignition switch ON, brake pedal released 11 to 14 V
A24-19 (SFTD) - A24-10 (E1) W - W-B Down-shift position switch signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever in "-" Below 1 V
A24-20 (SFTU) - A24-10 (E1) G - W-B Up-shift position switch signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever in "+" Below 1 V


CHECK ECM (for 6AR-FSE)


A422254N01
2.375,0.354 2.802,0.635 0.427,0.281 5.708,0.365 6.135,0.646 0.427,0.281 2.469,0.417 2.927,0.615 0.458,0.198 10 false C58 5.802,0.427 6.26,0.625 0.458,0.198 10 false A78

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A78-1 (BATT) - C58-53 (E1) R - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
C58-34 (D) - C58-53 (E1) R - W-B D shift position signal Engine switch on (IG), shift lever in D 11 to 14 V
Engine switch on (IG), shift lever not in D Below 1 V
A78-59 (S) - C58-53 (E1) GR - W-B S shift position signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever not in S Below 1 V
A78-9 (STP) - C58-53 (E1) SB - W-B Stop light switch signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A78-55 (CCS) - A78-41 (ECCS) R - BE Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
+RES switch pushed 235 to 245 Ω
-SET switch pushed 617 to 643 Ω
CANCEL switch pushed 1509 to 1571 Ω
A78-10 (ST1-) - C58-53 (E1) LG - W-B Stop light switch signal Engine switch on (IG), brake pedal depressed Below 1 V
Engine switch on (IG), brake pedal released 11 to 14 V
A78-43 (SFTD) - C58-53 (E1) W - W-B Down-shift position switch signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever in "-" Below 1 V
A78-42 (SFTU) - C58-53 (E1) G - W-B Up-shift position switch signal Engine switch on (IG), shift lever in S 11 to 14 V
Engine switch on (IG), shift lever in "+" Below 1 V