| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 transmission oil filler tube x Transaxle housing | 0.8 | 8 | 7 | ||||
| Overflow plug x Automatic transaxle oil pan sub-assembly | 40 | 408 | 30 | ||||
| Refill plug x rear transaxle cover sub-assembly | with SST | 42.4 | 432 | 31 | |||
| without SST | 49 | 500 | 36 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Transmission revolution sensor x Transmission valve body assembly | 10.8 | 110 | 8 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Lock plate x Transmission valve body assembly
(for Transmission wire) |
10.8 | 110 | 8 | |||
| Lock plate x Transmission valve body assembly
(for Temperature sensor) |
10.8 | 110 | 8 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 4 solenoid lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||||
| No. 3 solenoid lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||||
| Solenoid lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||||
| No. 2 solenoid lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||||
| Solenoid (SL) valve x Transmission valve body assembly | 10.8 | 110 | 8 | ||||
| Transmission valve body assembly x Transaxle case sub-assembly | Bolt (A), (B), (C) | 10.8 | 110 | 8 | |||
| Bolt (D) | 9.6 | 98 | 85 | ||||
| Valve body oil strainer assembly x Transmission valve body assembly | 9.6 | 98 | 85 | ||||
| Automatic transaxle oil pan sub-assembly x Transaxle case sub-assembly | except Precoated bolt | 7.5 | 76 | 66 | |||
| Precoated bolt | 7.0 | 71 | 62 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Park/neutral position switch assembly x Transaxle case sub-assembly | 5.4 | 55 | 48 | ||||
| Transmission control shaft lever x Manual valve lever shaft sub-assembly | 12.7 | 130 | 9 | ||||
| Transmission control cable assembly x Transmission control shaft lever | 12 | 122 | 9 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Transmission oil cooler x Front engine mounting bracket | 13.5 | 138 | 10 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Transmission floor shift assembly x Vehicle body | 12 | 122 | 9 | |||
| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| Shift paddle switch (transmission shift switch assembly) x Steering wheel assembly | 1.7 | 17 | 15 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Transmission control cable assembly x Vehicle body | 6.0 | 61 | 53 | ||||
| Transmission control cable assembly x Transmission control shaft lever | 12 | 122 | 9 | ||||
| Front lower No. 1 floor heat insulator x Vehicle body | 4.9 | 50 | 43 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Wire harness clamp bracket x Transaxle case sub-assembly | 20 | 204 | 15 | |||
| No. 1 transmission control cable bracket x Transaxle case sub-assembly | 12 | 122 | 9 | |||
| Rear engine mounting bracket sub-assembly x Transaxle housing | 42 | 428 | 31 | |||
| Engine mounting insulator LH x Automatic transaxle case sub-assembly | 42 | 428 | 31 | |||
| Automatic transaxle assembly x Engine assembly | Bolt (A) Bolt Length: 55 mm (2.17 in.) | 64 | 653 | 47 | ||
| Bolt (B) Bolt Length: 50 mm (1.97 in.) | 46 | 469 | 34 | |||
| Bolt (C) Bolt Length: 32 mm (1.26 in.) | 44 | 449 | 32 | |||
| Bolt (C) Bolt Length: 33 mm (1.30 in.) | 43 | 438 | 32 | |||
| Front engine mounting bracket x Transaxle housing | 42 | 428 | 31 | |||
| Wiring harness connector x Transaxle case sub-assembly | 11.3 | 115 | 8 | |||
| Earth wire x Transaxle case sub-assembly | 20 | 204 | 15 | |||
| Wire harness x Transaxle case sub-assembly | 10 | 102 | 7 | |||
| Wire harness x Rack and pinion power steering gear assembly | 10 | 102 | 7 | |||
| Drive plate and torque converter assembly setting bolt x Torque converter assembly | 41 | 418 | 30 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Manual detent spring sub-assembly and manual detent spring cover x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||||
| Pawl stopper plate x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||||
| No. 1 transmission case plate x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||||
| Pawl shaft clamp x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||||
| Counter drive gear nut x Front planetary gear assembly | 120 | 1224 | 89 | ||||
| Front oil pump assembly x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||||
| Transaxle housing oil separator x Transaxle housing | 22.7 | 231 | 17 | ||||
| Clamp x Transaxle housing | 22.7 | 231 | 17 | ||||
| Transaxle housing x Transaxle case sub-assembly | except Precoated bolt | 30.6 | 312 | 23 | |||
| Precoated bolt | 22.7 | 231 | 17 | ||||
| Rear transaxle cover plate x Rear transaxle cover sub-assembly | 7.5 | 76 | 66 | ||||
| Rear transaxle cover sub-assembly x Transaxle case sub-assembly | except Precoated bolt | 22.7 | 231 | 17 | |||
| Precoated bolt | 16.9 | 172 | 12 | ||||
| Rear transaxle cover plug x Rear transaxle cover sub-assembly | 7.4 | 75 | 65 | ||||
| Refill plug x Rear transaxle cover sub-assembly | 49 | 500 | 36 | ||||
| Transmission valve body assembly x Transaxle case sub-assembly | Bolt (A), (B), (C) | 10.8 | 110 | 8 | |||
| Bolt (D) | 9.6 | 98 | 85 | ||||
| Valve body oil strainer assembly x Transmission valve body assembly | 9.6 | 98 | 85 | ||||
| Automatic transaxle oil pan sub-assembly x Transaxle case sub-assembly | except Precoated bolt | 7.5 | 76 | 66 | |||
| Precoated bolt | 7.0 | 71 | 62 | ||||
| No. 1 transmission oil filler tube x Automatic transaxle oil pan sub-assembly | 0.8 | 8 | 7 | ||||
| Overflow plug x Automatic transaxle oil pan sub-assembly | 40 | 408 | 30 | ||||
| No. 2 transaxle case plug x Transaxle housing | 17 | 173 | 13 | ||||
| No. 1 transaxle case plug x Transaxle case sub-assembly | 7.4 | 75 | 65 | ||||
| Oil pump with motor assembly x Transaxle case sub-assembly | 22 | 224 | 16 | ||||
| Oil cooler inlet elbow x Transaxle case sub-assembly | Specified tightening torque | 27 | 275 | 20 | |||
| Using a SST | 15.3 | 156 | 11 | ||||
| Oil cooler union sub-assembly x Transaxle case sub-assembly | Union bolt | 27 | 275 | 20 | |||
| Bolt | 12 | 122 | 9 | ||||
| Park/neutral position switch assembly x Transaxle case sub-assembly | 5.4 | 55 | 48 | ||||
| Transmission control shaft lever x Manual valve lever shaft sub-assembly | 12.7 | 130 | 9 | ||||
| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| Stator shaft assembly x Front oil pump and gear body sub-assembly | 9.3 | 95 | 82 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Front differential ring gear x Front differential case | 120 | 1224 | 89 | |||