87710G
1.INSPECT QUICK HEATER ASSEMBLY
| *a | Component without harness connected
(Quick Heater Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L2-1 (B) - L2-2 (E) | Always | 10 kΩ or less |
| L2-3 (B) - L1-1 (E) | Always | 10 kΩ or less |
| L2-3 (B) - L2-2 (E) | Always | 10 kΩ or less |
| L1-2 (B) - L1-1 (E) | Always | 10 kΩ or less |