Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 6AR-FSE) › 2018.04–2021.02
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0351287 COMPRESSOR(for 6AR-FSE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 6AR-FSE)  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY (A/C LOCK SENSOR)

a.
E270992C04
1.875,0.958 2.26,0.448 true 1.552,0.958 1.146,0.448 true 0.083,0.094 0.396,0.25 0.313,0.156 10 *a 2.313,0.302 2.813,0.469 0.5,0.167 10 SSR+ 0.802,0.323 1.302,0.49 0.5,0.167 10 SSR-
*a Component without harness connected
(Magnet Clutch Assembly (A/C Lock Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (SSR+) - 2 (SSR-) 20°C (68°F) 160 to 320 Ω


If the resistance is not as specified, replace the magnet clutch assembly.