Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 6AR-FSE) › 2018.04–2021.02
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0351287 COMPRESSOR(for 6AR-FSE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 6AR-FSE)  DISASSEMBLY  


PROCEDURE

Hide 88688K 1.REMOVE COOLER COMPRESSOR BRACKET

a.
E390949

Disengage the clamp.


b.

Remove the screw and cooler compressor bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E390950N01
1.458,1.802 2.781,1.802 true 2.813,1.698 3.271,1.896 0.458,0.198 10 false SST

Secure the compressor assembly with magnetic clutch in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that are used for adjusting clutch clearance.



d.
E363434

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
E363435

Using a snap ring expander, remove the snap ring and magnet clutch stator.