Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › SFI SYSTEM › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351507 SFI SYSTEM M

6AR-FSE ENGINE CONTROL  SFI SYSTEM  REGISTRATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 1. VIN OR FRAME NUMBER

NOTICE:

The Vehicle Identification Number (VIN) or frame number must be written to a replacement ECM.


a.

DESCRIPTION

HINT:

This registration section consists of 2 parts: Read VIN or frame number and Write VIN or frame number.


i.

Read VIN or frame number: This procedure allows the VIN or frame number stored in the ECM to be read in order to confirm that the 2 VINs or frame numbers, provided with the vehicle and stored in the vehicle ECM, are the same.


ii.

Write VIN or frame number: This procedure allows the VIN or frame number to be written to the ECM. If the ECM is replaced, or the ECM VIN or frame number and vehicle VIN or frame number do not match, the VIN or frame number can be registered, or overwritten in the ECM by following this procedure.



b.

READ VIN OR FRAME NUMBER

i.

Confirm the vehicle VIN or frame number.


ii.

Connect the GTS to the DLC3.


iii.

Turn the engine switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.

Powertrain > Engine > Utility
Tester Display
VIN
50005 372 2384

vi.

According to the display on the GTS, read the VIN or frame number stored in the ECM.



c.

WRITE VIN OR FRAME NUMBER

i.

Confirm the vehicle VIN or frame number.


ii.

Connect the GTS to the DLC3.


iii.

Turn the engine switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.

Powertrain > Engine > Utility
Tester Display
VIN
50005 372 2384

vi.

According to the display on the GTS, write the VIN or frame number to the ECM.