Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE (for Exhaust Side) › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351510 CAMSHAFT OIL CONTROL VALVE(for Exhaust Side) A

6AR-FSE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Exhaust Side)  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11101J 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A413307

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A195062C36
1.021,0.448 1.313,0.448 1.313,0.448 1.594,0.875 false 0.844,0.385 1.156,0.542 0.313,0.156 10 *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.