Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE (for Exhaust Side) › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351510 CAMSHAFT OIL CONTROL VALVE(for Exhaust Side) G

6AR-FSE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Exhaust Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 11101J 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 1.

Powertrain > Engine > Active Test
Tester Display
Control the Exhaust VVT OCV Duty Ratio Bank 1
50004 372 5

e.

Check the engine speed while operating the camshaft timing oil control valve assembly (for exhaust camshaft) using the GTS.

Standard Condition:
GTS Operation Engine Condition
0% Normal engine speed
100% Engine idles roughly or stalls


HINT:

Refer to "Data List / Active Test" [Exhaust VVT OCV Control Duty Ratio Bank 1 and Exhaust VVT Change Angle Bank 1].

Click hereEngine / Hybrid System>6AR-FSE (ENGINE CONTROL)>SFI SYSTEM>DATA LIST / ACTIVE TEST


If the operation is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.