Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351511 CAMSHAFT OIL CONTROL SOLENOID G

6AR-FSE ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1 / Data List / All Data / Intake VVT Change Angle Bank 1.

Powertrain > Engine > Active Test
Active Test Display
Control the Intake VVT OCV Duty Ratio Bank 1
Data List Display
Intake VVT Change Angle Bank 1
50004 372 4 397

e.

Read the Data List while performing the Active Test with the engine idling.

OK:
GTS Operation Data List (Intake VVT Change Angle Bank 1)
-100% to 100% Varies by 75 DegFR or more


If the result is not as specified, check the camshaft timing oil control solenoid assembly, wire harness and ECM.