Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351511 CAMSHAFT OIL CONTROL SOLENOID A

6AR-FSE ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  REMOVAL  


PROCEDURE

Hide 15370 1.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A413309

Disconnect the camshaft timing oil control solenoid assembly connector.


b.

Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover sub-assembly.

NOTICE:

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.



c.

Remove the O-ring from the camshaft timing oil control solenoid assembly.

NOTICE:
·

If the O-ring comes off in the timing chain cover sub-assembly, make sure to remove it.

·

Do not drop the O-ring into the timing chain cover sub-assembly.