Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › KNOCK SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351521 KNOCK SENSOR G

6AR-FSE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK CONTROL SENSOR

a.
A171218C11
0.094,0.094 0.406,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Knock Control Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25 °C (77 °F) 120 to 280 kΩ


If the result is not as specified, replace the knock control sensor.