Home › Engine / Hybrid System › 6AR-FSE (LUBRICATION) › OIL PRESSURE SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072208 6AR-FSE LUBRICATION _0351650 OIL PRESSURE SENSOR A

6AR-FSE LUBRICATION  OIL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 83520 1.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

a.

Disconnect the oil pressure sender gauge assembly connector.


b.
A414046

Using a 27 mm deep socket wrench, remove the oil pressure sender gauge assembly.