Home › Engine / Hybrid System › 6AR-FSE (FUEL) › FUEL PUMP (for High Pressure) › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072204 6AR-FSE FUEL _0353739 FUEL PUMP(for High Pressure) G

6AR-FSE FUEL  FUEL PUMP(for High Pressure)  INSPECTION  


PROCEDURE

Hide 23021 1.INSPECT FUEL PUMP WITH SEAL SUB-ASSEMBLY

a.
A333796C01
0.333,0.135 0.646,0.292 0.313,0.156 10 false *a
*a Component without harness connected
(Fuel Pump with Seal Sub-assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.5 Ω


If the result is not as specified, replace the fuel pump with seal sub-assembly.