Home › Engine / Hybrid System › 6AR-FSE (FUEL) › FUEL SENDER GAUGE ASSEMBLY › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072204 6AR-FSE FUEL _0353742 FUEL SENDER GAUGE ASSEMBLY A

6AR-FSE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Engage the 2 clamps to connect the wire harness to the fuel suction plate sub-assembly.

NOTICE:

Do not damage the wire harness.



c.

Install the harness protector to the wire harness.


d.

Connect the fuel sender gauge assembly connector.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY