Home › Engine / Hybrid System › 6AR-FSE (EMISSION CONTROL) › VACUUM SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072205 6AR-FSE EMISSION CONTROL _0353748 VACUUM SENSOR A

6AR-FSE EMISSION CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 89421 1.INSTALL VACUUM SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR)

a.

Install the vacuum hose to the vacuum sensor (manifold absolute pressure sensor).


b.

Install the vacuum sensor (manifold absolute pressure sensor) to the intake manifold with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the vacuum hose to the intake manifold.


d.

Connect the vacuum sensor (manifold absolute pressure sensor) connector.