Home › Engine / Hybrid System › 6AR-FSE (EMISSION CONTROL) › PCV VALVE › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072205 6AR-FSE EMISSION CONTROL _0353752 PCV VALVE G

6AR-FSE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

a.

Install a clean hose to the PCV valve (ventilation valve sub-assembly).


b.

Check PCV valve (ventilation valve sub-assembly) operation.

i.
A304956C01
2.938,2.031 2.75,2.031 2.75,2.031 2.573,1.635 false 2.979,1.927 3.292,2.125 0.313,0.198 10 false *a 3.26,1.083 3.427,1.292 0.167,0.208 10 false *b
*a Hose
*b Air
V100135

Cylinder Head Cover Sub-assembly Side


Blow air into the cylinder head cover sub-assembly side, and check that air passes through easily.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).


ii.
A304957C01
0.625,2.031 0.771,2.031 0.771,2.031 0.875,1.406 false 0.448,1.958 0.76,2.156 0.313,0.198 10 false *a 0.406,1.083 0.719,1.281 0.313,0.198 10 false *b
*a Hose
*b Air
V100135

Intake Manifold Side


Blow air into the intake manifold side, and check that air passes through with difficulty.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).



c.

Remove the hose from the PCV valve (ventilation valve sub-assembly).