Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for 2AR-FE) › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0327280 CRUISE CONTROL SYSTEM(for 2AR-FE) L

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for 2AR-FE)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected:

System See Procedure
Lane departure alert system (w/ Steering Control) (Click here)
Pre-collision system
Parking assist monitor system
Panoramic View Monitor System



IGNITION SWITCH EXPRESSIONS


a.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine start START On (Start)



CONSTRUCTION


a.
A401214C01
2.615,1.031 2.865,1.031 true 2.271,0.698 2.396,0.542 2.396,0.542 2.833,0.542 true 2.281,1.396 2.406,1.552 2.406,1.552 2.917,1.552 true 1.75,0.99 2.26,0.99 true 1.552,0.365 1.865,0.521 0.313,0.156 10 false *1 2.885,0.938 3.094,1.146 0.208,0.208 10 true *a 2.927,1.458 3.115,1.656 0.188,0.198 10 true *b 2.865,0.448 3.177,0.604 0.313,0.156 10 false *c 1.594,0.906 1.906,1.063 0.313,0.156 10 false *d
*1 Steering Pad Switch Assembly
*a Cruise Control Main Switch
*b -SET Switch
*c +RES Switch
*d CANCEL Switch


The cruise control switch is located on the right side of the steering pad switch assembly.



HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM


a.

Turn the cruise control system off using the cruise control main switch when not using the cruise control system.


b.

Be careful when driving downhill with the cruise control system controlling vehicle speed as the vehicle speed may exceed the set speed.


c.

The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.


d.

While the cruise control system is controlling vehicle speed, if the cruise control indicator turns off and a warning message is displayed, turn the cruise control system off using the cruise control main switch to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction.


e.

Do not use the cruise control system where the road conditions are as follows:

·

Heavy traffic

·

Steep downhill roads

·

Roads with sharp turns

·

Icy or snowy roads

·

Slippery roads



f.

Do not use the cruise control system while towing.