Home › Vehicle Interior › SEAT › REAR SEATBACK HEATER (for Fold Down Seat Type) › from 2018.04
RM33A0E _58 Vehicle Interior _065385 SEAT _0351389 REAR SEATBACK HEATER(for Fold Down Seat Type) G

SEAT  REAR SEATBACK HEATER(for Fold Down Seat Type)  INSPECTION  


PROCEDURE

Hide 87510S 1.INSPECT REAR SEATBACK HEATER ASSEMBLY LH

a.
B518818C01
0.188,0.146 0.417,0.375 0.229,0.229 10 false *a
*a Component without harness connected
(Rear Seatback Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seat heater temperature 20 °C (68 °F) 2.41 to 2.89 Ω
1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.40 Ω


If the result is not as specified, replace the rear seatback heater assembly LH.


Hide 87510T 2.INSPECT REAR SEATBACK HEATER ASSEMBLY RH

a.
B518818C02
0.188,0.156 0.438,0.417 0.25,0.26 10 false *a
*a Component without harness connected
(Rear Seatback Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seat heater temperature 20 °C (68 °F) 2.41 to 2.89 Ω
1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.40 Ω


If the result is not as specified, replace the rear seatback heater assembly RH.