Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (w/o Automatic Headlight Beam Level Control System) › from 2018.08
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0341635 LIGHTING SYSTEM(w/o Automatic Headlight Beam Level Control System) U

LIGHTING (EXT)  LIGHTING SYSTEM(w/o Automatic Headlight Beam Level Control System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


B472410N01
1.125,3.25 1.563,3.5 0.438,0.25 3.156,3.219 3.594,3.469 0.438,0.25 5.448,3.208 5.885,3.458 0.438,0.25 1.698,4.573 2.135,4.823 0.438,0.25 5.385,4.573 5.823,4.823 0.438,0.25 1.104,6.167 1.542,6.417 0.438,0.25 3.667,6.125 4.104,6.375 0.438,0.25 5.292,6.198 5.729,6.448 0.438,0.25 6.313,6.198 6.75,6.448 0.438,0.25 3.365,7.646 3.802,7.896 0.438,0.25 1.656,1.208 1.958,1.208 false 1.667,1.552 1.969,1.552 false 1.667,1.875 1.969,1.875 false 4.042,0.792 4.042,0.313 4.042,0.313 4.229,0.313 false 3.469,7.698 3.781,7.896 0.313,0.198 10 false MB 4.292,0.24 4.604,0.438 0.313,0.198 10 false MB 2.042,1.135 2.354,1.333 0.313,0.198 10 false K51 2.052,1.479 2.365,1.677 0.313,0.198 10 false K52 2.052,1.802 2.365,2 0.313,0.198 10 false K53 0.875,1.083 1.188,1.281 0.313,0.198 10 false 3D 0.875,1.667 1.188,1.865 0.313,0.198 10 false 3C 0.885,2.031 1.198,2.229 0.313,0.198 10 false 3E 0.906,2.26 1.219,2.458 0.313,0.198 10 false 3F 5.854,1.146 6.167,1.344 0.313,0.198 10 false 3B 5.854,1.76 6.167,1.958 0.313,0.198 10 false 3A 1.229,3.302 1.542,3.5 0.313,0.198 10 false K53 3.271,3.271 3.583,3.469 0.313,0.198 10 false K52 5.542,3.26 5.854,3.458 0.313,0.198 10 false K51 1.833,4.625 2.146,4.823 0.313,0.198 10 false 3A 1.24,6.219 1.552,6.417 0.313,0.198 10 false 3C 3.813,6.177 4.125,6.375 0.313,0.198 10 false 3D 6.438,6.24 6.75,6.438 0.313,0.198 10 false 3E 5.427,6.25 5.74,6.448 0.313,0.198 10 false 3F 5.51,4.625 5.823,4.823 0.313,0.198 10 false 3B

a.

Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3B-3 - Body ground W-B - Body ground Ground Always Below 1 Ω
3C-1 - Body ground LG - Body ground Battery power supply Always 11 to 14 V
3F-1 - Body ground W - Body ground*1
B - Body ground*2
Battery power supply Always 11 to 14 V

*1: Alternator 100A Type

*2: Alternator 130A Type or Alternator 150A Type



c.

Connect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


d.

Measure the voltage and resistance, and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3A-40 - Body ground LA-G - Body ground BKUP LP relay drive output Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
3C-19 - Body ground BE - Body ground BKUP LP relay drive output Ignition switch off, shift lever not in R Below 1 V
Ignition switch ON, shift lever in R 11 to 14 V
3C-23 - Body ground LA-P - Body ground BKUP LP relay drive output Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
3C-25 - Body ground* BE - Body ground FOG FR relay drive output Light control switch in tail or head position, fog light switch in front position Below 1 V
Light control switch in tail or head position, fog light switch off position 11 to 14 V
3C-28 - Body ground GR - Body ground Daytime running light system drive output Daytime running light system operating Below 1 V
Daytime running light system not operating 11 to 14 V
3C-31 - Body ground V - Body ground H-LP LH relay drive output Light control switch in head position Below 1 V
Taillights off 11 to 14 V
3C-32 - Body ground LA-B - Body ground Clearance lights drive output Taillights on 11 to 14 V
Taillights off Below 1 V
3D-10 - Body ground LG - Body ground Back-up lights drive output Ignition switch off, shift lever not in R Below 1 V
Ignition switch ON, shift lever in R 11 to 14 V
3D-21 - Body ground LG - Body ground Rear fog light drive output Light control switch in tail or head position, fog light switch in rear position 11 to 14 V
Light control switch in tail or head position, fog light switch off position Below 1 V
3D-30 - Body ground LA-B - Body ground Taillights and license plate lights drive output Taillights on 11 to 14 V
Taillights off Below 1 V
K51-14 (LLEW) - Body ground GR - Body ground Light control ECU signal input Ignition switch ON, taillights off 11 to 14 V
Ignition switch ON, light control switch in head position Pulse generation
K51-15 (RLEW) - Body ground R - Body ground Light control ECU signal input Ignition switch ON, taillights off 11 to 14 V
Ignition switch ON, light control switch in head position Pulse generation
K51-19 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
K52-12 (HRY2) - Body ground BE - Body ground H-LP RH relay drive output Light control switch in head position Below 1 V
Taillights off 11 to 14 V
K52-13 (DIM) - Body ground G - Body ground High beam headlight drive output Light control switch in head position and dimmer switch in high or high flash position Below 1 V
Dimmer switch not in high or high flash position 11 to 14 V
K52-16 (HEAD) - Body ground LG - Body ground Light control switch head position input Light control switch in head position Below 1 V
Light control switch not in head position 11 to 14 V
K52-23 (CLTB) - K52-25 (CLTE) BE - GR Automatic light control sensor power supply output Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
K52-24 (CLTS) - Body ground R - Body ground Automatic light control sensor signal input Ignition switch off Below 1 V
Ignition switch ON Pulse generation
(See waveform 1)

*: w/ Front Fog Light


i.
E276298N01
2.844,1.646 3.219,1.813 0.375,0.167 10 false GND

Waveform 1

Item Content
Tester Connection K52-24 (CLTS) - Body ground
Tool setting 2 V/DIV., 10 ms./DIV.
Condition Ignition switch ON

HINT:

The communication waveform changes according to the surrounding brightness.