Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER › 2018.08–2019.10
RM33A0E _56 Audio / Visual / Telematics _065373 AUDIO / VIDEO _0318989 REAR DOOR SPEAKER G

AUDIO / VIDEO  REAR DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR SPEAKER ASSEMBLY (for 6 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.

for TMC Made:

i.
E222247C69
0.18,0.132 0.364,0.307 0.184,0.175 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


If the result is not as specified, replace the speaker.



d.

for TMR Made:

i.
E219303C85
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


If the result is not as specified, replace the speaker.



Hide 86160B 2.INSPECT REAR SPEAKER ASSEMBLY (for 9 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E219303C30
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 6.2 to 9.4 Ω


If the result is not as specified, replace the speaker.