Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75732A
1.REMOVE FRONT DOOR OUTSIDE MOULDING
When removing the front door outside moulding, heat the vehicle body and front door outside moulding using a heat light.
| Item | Temperature |
|---|---|
| Front Door Outside Moulding and Vehicle Body | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body and front door outside moulding excessively.
|
Protective Tape |
Apply protective tape around the front door outside moulding as shown in the illustration.
Using a heat light, heat the vehicle body and front door outside moulding.
| *a | Double-sided Tape |
Separate the double-sided tape to remove the front door outside moulding.