Home › Drivetrain › K120 (CVT) › PARK / NEUTRAL POSITION SWITCH › from 2021.02
RM33A0E _52 Drivetrain _098634 K120 CVT _0461787 PARK / NEUTRAL POSITION SWITCH G

K120 CVT  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 84540 2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and check that the engine can be started when the shift lever is in N or P, but cannot be started in any other position.


c.

Check that the back-up light illuminates only when the shift lever is in R, but does not function in any other position.

If a malfunction or failure is found, check the park/neutral position switch assembly for continuity.