Home › Drivetrain › K120 (CVT) › SHIFT LEVER KNOB › from 2021.02
RM33A0E _52 Drivetrain _098634 K120 CVT _0461790 SHIFT LEVER KNOB A

K120 CVT  SHIFT LEVER KNOB  INSTALLATION  


PROCEDURE

Hide 33504F 1.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C370836

Install the shift lever knob sub-assembly to the transmission floor shift assembly.


b.
C370837

Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.

NOTICE:

Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.