Home › Drivetrain › K120 (CVT) › DIFFERENTIAL CASE › from 2021.02
RM33A0E _52 Drivetrain _098634 K120 CVT _0461795 DIFFERENTIAL CASE A

K120 CVT  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C399101

Secure the front differential ring gear in a vise between aluminum plates.

NOTICE:

Be careful not to damage the front differential ring gear in the vise.



b.

Remove the 12 bolts.


c.

Using a plastic hammer, tap on the front differential ring gear to remove it from the differential case sub-assembly.