Home › General › MAINTENANCE › A25A-FKS DRIVE BELT › from 2021.02
RM33A0E _V1 General _065356 MAINTENANCE _0320159 A25A-FKS DRIVE BELT A

MAINTENANCE  A25A-FKS DRIVE BELT  REMOVAL  


PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 16361A 5.REMOVE V-RIBBED BELT

a.
A400255

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.


b.

Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.


c.

Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.