1.DRAIN ENGINE COOLANT
2.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
16264D
3.REMOVE FLOW SHUTTING VALVE (NO. 2 WATER BY-PASS HOSE)
Disconnect the flow shutting valve (No. 2 water by-pass hose) connector.
Slide the clip and disconnect the No. 4 water by-pass hose from the flow shutting valve (No. 2 water by-pass hose).
Slide the clip and disconnect the flow shutting valve (No. 2 water by-pass hose) from the transmission oil cooler.
Remove the bolt and the flow shutting valve (No. 2 water by-pass hose).